Lowrance X51/X125 Transducer

Lowrance X51/X125 Transducer

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [Fishing Equipment] >> Boating Talk >> Lowrance X51/X125 Transducer

Page: [1]

Name

Message

<< Older Topic Newer Topic >>

Lowrance X51/X125 Transducer - 27 October 2008 18:09:19

Lee Williams

Posts: 231
Joined: 26 May 2005
From: Broome
Status: offline

I have just bought a Lowrance X125 to replace my old X51. The single frequency 200kHz Skimmer appears to be the same unit as well as the power connection. A simple changeover is right up my alley but before I plug anything in and blow the lot to bits I wonder if anyone in the know can offer me any words of advice!

(The X51 is not going to sounder heaven, but getting pride of place in my little barra punt)

< Message edited by Lee Williams -- 28 October 2008 17:37:51 >

_____________________________

Yo ho ho and a bottle of Rum!

Post #: 1

RE: Lowrance X51/X125 Transducer - 28 October 2008 20:02:02

Ray Denn

Posts: 1292
Joined: 5 June 2003
From: Carlisle/Perth, Western Australia
Status: offline

Have you checked the Lowrance website to see that the fittings are indeed the same.

Ray

_____________________________

I only work to pay for the fishing trips!

I am going to buy a new boat honest!

Catch and release fisherman. I catch fish and release them into my stomach!

(in reply to Lee Williams)

Post #: 2

RE: Lowrance X51/X125 Transducer - 28 October 2008 20:14:19

Rod Lohoar

Posts: 246
Joined: 5 June 2003
From: Mandurah, WA
Status: offline

Hi Lee
The old X51 transducer is different to the transducer required for the X125.
There are a couple of different model transducers for each unit. One has a built in temp sensor and the others dont.
The single units sell for around $ 125 while the others (with temp) should be around $180
John at Kingswood Marine can assist you further. Cheers

(in reply to Lee Williams)

Post #: 3

RE: Lowrance X51/X125 Transducer - 29 October 2008 7:41:34

Lee Williams

Posts: 231
Joined: 26 May 2005
From: Broome
Status: offline

Thanks Rod,

I will fit the unit with supplied transducer & power. I was just being slack.

_____________________________

Yo ho ho and a bottle of Rum!

(in reply to Rod Lohoar)

Post #: 4